Power Production Technician

The Contractor shall provide OM&R support for all generators, automatic transfer switched (ATS), synchronization gears and light carts, refueling support services to enable refueling of all operational generators on an ongoing basis. The Contractor shall provide inspections, maintenance as required. In addition, the Contractor shall perform facility management and maintenance and repair for fuel systems supporting facility stationery and emergency back-up generators.

Essential Responsibilities:

The Contractor shall use all USG provided generators, transformers, switchgears, fuel tanks, cabling and any other equipment needed to support the government’s requests of spot generators providing prime power for mission requirements. Additionally, in order to minimize mission impact due to power outages caused by routine maintenance or unexpected equipment failure, the Contractor shall utilize USG provided back-up generators to meet the performance objectives of providing reliable and continuous prime power support and no scheduled power outages longer than one (1) hour.

The Contractor shall:

Install, remove, and operate electrical power generating and control systems, automatic or manual transfer switches and associated equipment with proper technical skills.

Check equipment for serviceability; position equipment such as gasoline and diesel engines, generators, switchgear, air compressors, and other power generating auxiliary equipment.

Check installed equipment to ensure compliance with publications, policies, and directives.

Inspect, test, and service component systems such as safety, fuel, lubrication, cooling, and air pressure, pumps, regulators, governors, and accessory equipment.

Observe and interpret instruments such as ammeters, voltmeters, frequency meters, synchro scopes, automatic temperature and pressure recorders, and engine oil, fuel, and coolant gauges.

Adjust engine generator systems to maintain proper voltage, current, frequency, and synchronization; synchronize multiple generators when needed.

The Contractor shall operate medium and low voltage generators as required. Operations of the electric generators include start-up, transfer of load, generation, and shutdown of all associated electric power equipment. Operations responsibilities include monitoring and adjusting generator and electrical output performance as required; ensuring adequate stores of fuel are available for continuous operation of the plants; switching operating generators to maintain electrical output while permitting servicing on generators taken off line. Duties include observation of key and critical operational parameters and taking appropriate measures in the event of out-of-tolerance conditions. For locations where generators are providing prime power, performance of these duties must be on a 24-hour a day, 7-day week shift schedule, if continuous power is required. The Contractor shall use technical orders, where applicable, and employ good commercial practices in all generator operations, including use of AFMAN 32-1062, applicable UFCs, manufacturer instructions, industry standards, and environmental/occupational safety requirements.

Perform all other position related duties as assigned or requested.

Minimum Position Knowledge, Skills, and Abilities Required:

• High school diploma or equivalent training/experience and a valid driver’s license
• Minimum of five (5) years’ experience in the electrical power generation field
• Ability to manage resources and activities devoted to installation, operation, maintenance, and repair of electrical power generating and control systems
• Must have knowledge of: Principles of electronics and electricity, including generation, conversion, transformation, distribution, and utilization; types, capacity, and purpose of low voltage circuits, circuit breakers, switches (automatic/manual type), fuses, regulators, relays, instruments, and meters associated with electric generation and distribution; interpreting instrument and meter readings; wiring diagrams, schematics, drawings and technical publications; techniques of operating and maintaining internal combustion engines, generators, generating plants, distribution panels, and accessory equipment; use and purpose of test equipment; safety rules and practices; grounding practices, environmental policies; principles of management; and operation and repair of electrical power production systems
• Must be power production journeyman or master technicians
• Experience with operating and maintaining generators ranging from 5 to 4,300 kilowatts desired
• Must be able to obtain and maintain facility credentials/authorization. Note: US Citizenship is required for facility credentials/authorization at this work location.
  
  

Work Environment, Physical Demands, and Mental Demands:

While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or fee; and talk or hear. The employee frequently is required to walk; reach with hands and arms; and stoop, kneel, crouch, or crawl. The employee is occasionally required to sit, climb or balance, and taste or smell. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, and ability to adjust focus. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts and extreme heat. The employee is regularly exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; outside weather conditions; extreme cold; and risk of electrical shock. The noise level in the work environment is usually loud, or may include unsafe conditions, questioning nonstandard operations or environmental factors that may involve unmitigated hazards, and providing feedback to supervisors and managers on all safety issues.

Other Responsibilities:

Safety - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams.

Quality - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities.

Procedure Compliance - Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his/her job.

Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

---